Welcome to Shandong Xunda Anticorrosion Coating Co.,Ltd
About Us
Contact Us

Oversea department


TEL:+86 537-2611133

FAX:+86 537 2299111

Phone:+86 15910006277

Email: sales@shandongxunda.com

Skype: pipeline.tape

Whatapp: +86 15910006277


Add:NO.1, Jibei High-tech Industrial Park,Jining City,Shandong Province,China

You are here: Home > Products > Pipeline Anticorrosion Coatings >
PP Woven Fiber Tape T500

Shandong Xunda Anticorrosion Coating Co.,Ltd is a China pp woven fiber tape, PP woven fiber wrap tape manufacturer, supplier and company, our professional factory can provide you pp woven fiber tape t500 products with both good price and quality.

Polypropylene Tape Coating for Pipeline anti corrosion

Product Description

Polypropylene anticorrosion Fiber tape ,cold applied, reinforced tape to protect metallic and concrete surfaces against corrosive forces. It is constinuted by an adhesive (modified bitumen with synthetic rubber) of increased thickness, laminated onto a film of woven
Polypropylene fabric and disposable release sheet, which creates a strong bond with a pipe surface, protecting against moisture penetration and metal structures.This tape is the best solution for coating of pipes and repair.


Backing : Polypropylene woven fabric cloth,
Adhesive layer: Butyl rubber with modified bitumen adhesive
Release paper: Grey silicon release paper


        Pipelines anti-corrosion protection              

-Waterproofing membrane for basements,substructures applications. 

bridge, vehicular traffic structures, or overlaid with wearing course.

-Tough, high performance  for critical substructures

 and civil  engineering works.

-Provides a vapor and waterproof membrane to water structures

 and protects concrete from attack by aggressive ground salts.

-Protection for wall ,floor, roof, corner, basement etc. to against from 

attack by bad weather, rain, acid alkaline salt

_ Weld joints
_ Bends
_ Fittings
_ Bare pipe lengths
_ Pipe rehab and repair
-Bare pipe length


Pipes protection         Waterproofing-

_ Cold applied 
_ Excellent self adhesion to pipe 
_ Flexibility provides extra protection at vulnerable areas
_ Excellent conformability and consistent uniform thickness                
_ Easily applied with no special equipment
_ Compatible with common pipe coatings
-Tenacious adhesion, 
mechanical characteristics, good elongation and flexibility.                

-Cold applied.
-High resistance to bad weather environmen       t
-Good performance itself to keep dry
-Easily application &installation.
-Suitable for a wide range of temperatures
- Compatible primers

Physical Properties

Base film -- PP woven fabric --
Thickness for base film
Thickness for Adhesive
thickness for total
Tensile strength N/10mm 200 ASTMD1000
Elongation at break % 80 ASTMD1000
Peel strength to primed steel N/cm 25 EN 12068
Annex C
Peel strength tape to tape at N/cm 25 EN 12068
Annex B
Impact resistance at 23° mm 20 EN 12691
Application temperature °C -5+50 --
Operation temperature °C -5+80 --
Shelf life Months 12

Ordering InformationT
ape Coatings are available in roll form.
Ordering Example: T500-50 4X100FT 3’’

50 Total tape thickness in mils 35 mils (0.89 mm), 50 mils (1.2 mm),65mil(1.65mm)
4 Tape width in inches 4" (101 mm), 6"(152 mm),
100FT Tape roll length in feet 100 ft (30 m)
1.5 Tape inner core diameter in inches 1.5" (38 mm), 3" (75 mm)